NCP-ARI Practice Questions: Pre-Deployment Planning and Site Assessment Domain

A) They provide visual evidence of current conditions, constraints, and possible deviations from drawings.

B) They replace the need for site measurements.

C) They prove that all cable bundles have passed validation.

D) They are useful only for marketing and executive reporting, since photos add no engineering value once drawings exist.

A) Only the cabling team because they perform the installation.

B) Only procurement, since the equipment is bought and the vendor's default power and cooling specs apply.

C) Facilities, electrical, cooling, network, and deployment stakeholders who own the constraints.

D) Only the operations team after the rack is live.

A) Whether the storage equipment has matching labels.

B) Whether the storage equipment can be used as a temporary cable support during install and burn-in.

C) Whether the AI rack can be installed diagonally to avoid it.

D) Whether non-IT items reduce clearance, airflow, pathway access, or safety around the AI rack.

A) Cable cartons are stacked neatly in a different part of the staging room, off to the side.

B) Cable bundles are staged by rack but not reconciled to source/destination documentation.

C) Rack labels use a slightly different shade of white.

D) The staging table is not next to the loading dock.

A) Reconcile part numbers and source/destination labels against the deployment documentation before staging.

B) Stage them by approximate length and label them after validation.

C) Use them only for spare links because any cable arriving without a factory label should never be installed.

D) Install them in the next available rack and update the diagram afterward.

A) Use the cold aisle as temporary storage during installation.

B) Stack the equipment in front of the neighboring racks for a shorter lift path.

C) Plan an approved staging and movement path before delivery and installation.

D) Proceed because staging is unrelated to rack readiness.

A) Proceed if the rack can be rolled into position safely on the raised floor tiles.

B) Confirm floor loading and rack weight limits before placement and population.

C) Install only network switches until the servers arrive.

D) Use lighter cable trays to offset rack weight.

A) Only the total number of boxes delivered to the loading area.

B) Cable assemblies, transceivers, labels, rack accessories, cleaning supplies, and documented part numbers.

C) Only the servers and switches, because all cabling accessories can be handled later after initial power-on stage.

D) Only serial numbers for equipment that is already mounted in racks.

A) Candidates should ask for the physical topology and port-level mapping before deployment.

B) Candidates should accept the phrase because standard topology is self-evident.

C) Candidates should infer topology from switch model names.

D) Candidates should cable nearest-neighbor links first and then adjust the rest after link validation.

A) Request or create the physical network documentation that maps source ports, destination ports, cable types, and paths.

B) Begin staging by rack number and add port details during install, since technicians can reconstruct endpoints from the sequence.

C) Use cable length to infer the source and destination for each connection.

D) Install only intra-rack cabling until the missing details are discovered.