CompTIA A+ Core 1 Cheat Sheet

Free A+ Core 1 (220-1201) cheat sheet: hardware, networking, mobile devices, cloud and troubleshooting. Revise with study cards and linked sample tests.

This free interactive cheat sheet from FlashGenius is a quick-reference study guide with swipeable cards you can review on any device — no signup required.

Exam at a glance

Exam
220-1201 · V15
Passing score
675 / 100–900
Format
Up to 90 questions · 90 minutes
Certification
Pass both exams in the same series

This is a free, original quick reference for practical IT support revision, organized around the official 220-1201 objectives. Read a card, connect the concept to a support task, then swipe or use Next. A practice percentage is not a CompTIA scaled score or a prediction of exam results.

Start practicing before you swipe

Open the 220-1201 sample-test hub | Try the quick-start quiz

Official domain weights: Mobile Devices 13% · Networking 23% · Hardware 25% · Virtualization and Cloud Computing 11% · Hardware and Network Troubleshooting 28%.

CompTIA exam information | Official exam objectives (PDF)

Complete reference

Mobile devices · hardware and connections

Domain 1 · Mobile Devices · 13%

laptop components

SO-DIMM memory
Compact laptop memory modules; check generation, capacity, speed, and supported slots before replacement.
M.2 storage
A small form factor, not a protocol: an M.2 drive may use SATA or PCIe/NVMe; confirm motherboard support.
Laptop displays
Match panel size, resolution, connector, and touch capability; a cracked panel can be separate from the graphics subsystem.
Digitizer and touch panel
The digitizer senses touch or pen input; a working image with failed touch points toward the touch layer or its connection.
Webcam and microphone
Check privacy shutters, mute controls, permissions, driver state, and whether the app selected the right device.
Wireless card
A laptop WLAN card provides Wi-Fi and often Bluetooth; antenna leads must be reattached to restore expected range.
Battery and adapter
Use a correctly rated, compatible adapter; swelling, heat, or a damaged battery calls for safe isolation and approved replacement.
Docking station
A dock consolidates power, display, network, and USB; verify host compatibility, firmware, and the dock's power budget.
Keyboard replacement
Laptop keyboards may be integrated with the top case; disconnect battery power and follow the device service guide.
Laptop cooling
Blocked vents or a failing fan can cause heat, throttling, and shutdowns; clear airflow and verify fan operation.
Camera privacy switch
A hardware shutter or kill switch can disable the camera even when the operating system reports the device installed.
Laptop upgrade limits
Thin devices may have soldered RAM or storage; check the manufacturer service documentation before promising an upgrade.

mobile accessories

USB-C dock
The connector shape alone does not promise video, charging wattage, or Thunderbolt; check the host port's supported modes.
Bluetooth headset
Pair in discoverable mode, confirm audio input/output selection, and remove stale pairings if connection negotiation fails.
Active stylus
A digitizer-compatible pen may need pairing, charging, or a supported screen; passive capacitive styluses work like a finger.
Mobile hotspot
Tethering shares a cellular data connection over Wi-Fi, USB, or Bluetooth; check plan allowance and client security.
SIM card
A removable subscriber identity module associates a device with a carrier account; reseat only with the device powered as directed.
eSIM
An embedded SIM profile is provisioned digitally; transfer or activation usually requires carrier approval and connectivity.
International roaming
Confirm carrier plan, roaming toggle, supported radio bands, and charges before troubleshooting a no-service report.

Mobile devices · management and sync

Domain 1 · enrollment, access, and data movement

management

MDM
Mobile device management applies organization policy, app configuration, inventory, and remote actions to enrolled devices.
Enrollment profile
A profile links the device to the organization's management service; incomplete enrollment can leave policy unapplied.
BYOD
Bring your own device permits personal hardware for work; define consent, work-data boundaries, privacy, and offboarding before access.
Containerization
A managed work profile isolates business apps and data from personal content, allowing targeted policy and removal.
Remote lock and wipe
Use a documented, authorized management action; distinguish a full-device wipe from selective removal of managed data.
Passcode policy
Require a device screen lock and suitable timeout; stronger controls reduce exposure when a device is lost.
Mobile OS updates
Apply supported security updates under change policy; verify battery, storage, backup, and restart conditions.
App permissions
Grant only the location, camera, contacts, or microphone access the app needs; review permissions when behavior is unexpected.
Lost device response
Report promptly, revoke sessions or tokens, locate/lock/wipe through approved controls, and document actions.
Mobile backups
Confirm what is backed up, encryption, account ownership, and restore access; sync is not automatically a complete backup.
Device inventory
Record asset identity, assigned user, OS version, enrollment, and lifecycle status without collecting unnecessary personal data.

sync

Account sync
A cloud account can synchronize contacts, calendars, mail, and settings; verify account selection and per-category toggles.
Calendar sync
Compare account, calendar visibility, time zone, and last successful sync before deleting or recreating entries.
Email profile
Check server settings, authentication, certificates, and modern-auth requirements; avoid weakening security to bypass a prompt.
File sync conflict
Two edits to the same item can create conflict copies; compare timestamps and content before choosing a version.
Bluetooth pairing
Pairing stores a trusted relationship; remove the old record on both ends and pair again after checking discovery mode.
NFC
Near-field communication works at very short range for pairing or contactless tasks; align the antenna area and verify feature support.
Cellular data
Check airplane mode, SIM/eSIM activation, preferred network, coverage, and data limit before changing network settings.
Wi-Fi calling
Voice uses a wireless network when carrier and device support it; validate the configured emergency address and network quality.
Screen rotation
Check orientation lock, sensor behavior, and app support; test across apps to distinguish a system setting from one app.

Networking · addressing and protocols

Domain 2 · Networking · 23%

models and traffic

TCP
Connection-oriented transport with sequencing, acknowledgments, and retransmission; suited to reliable ordered delivery.
UDP
Connectionless transport with lower overhead and no delivery guarantee; common for DNS queries, voice, and streaming.
IPv4 address
A 32-bit address identifies an interface; interpret it with its subnet mask or prefix to find the local network.
IPv6 address
A 128-bit address written in hexadecimal groups; link-local addresses begin FE80::/10 and are not internet-routable.
Private IPv4 ranges
RFC1918 blocks are 10.0.0.0/8, 172.16.0.0/12, and 192.168.0.0/16; routers translate them for typical internet access.
APIPA
169.254.0.0/16 is self-assigned when IPv4 DHCP fails; it often indicates the client did not get a lease.
Loopback
127.0.0.1 tests the local IPv4 TCP/IP stack; ::1 is IPv6 loopback and neither tests an external path.
Default gateway
The router interface a host uses for destinations outside its local subnet; an incorrect gateway blocks remote networks.
Subnet mask and CIDR
The mask/prefix separates network bits from host bits; /24 corresponds to 255.255.255.0.
DHCP lease
A DHCP server dynamically supplies addressing configuration; renew a lease after fixing scope, relay, or connectivity issues.
DNS resolver
DNS translates names to records such as A/AAAA addresses; test name resolution separately from raw IP reachability.
NAT/PAT
Network or port address translation maps private clients to public addresses; PAT multiplexes sessions using transport ports.
MAC address
A link-layer interface identifier used on the local network; switches learn source MACs to populate forwarding tables.
MTU
Maximum transmission unit is the largest payload a link carries without fragmentation; mismatches can cause selective connectivity failures.
VLAN
A logical layer-2 broadcast domain; access ports carry one VLAN while trunks carry tagged VLAN traffic.

ports

FTP 20/21
Classic file transfer uses TCP 21 for control and TCP 20 for active-mode data; prefer secure alternatives.
SSH 22
Secure Shell provides encrypted remote command-line access and secure file-transfer options.
Telnet 23
Legacy unencrypted remote terminal protocol; credentials and session data can be observed, so do not use for secure administration.
SMTP 25
Server-to-server mail transfer commonly uses TCP 25; authenticated mail submission commonly uses 587.
SMTPS 465 / submission 587
Implicit-TLS SMTP commonly uses TCP 465; authenticated message submission commonly uses TCP 587 with STARTTLS.
DNS 53
Domain Name System commonly uses UDP 53 for queries and TCP 53 for larger responses and zone transfers.
DHCP 67/68
Servers listen on UDP 67 and clients use UDP 68 for IPv4 address assignment.
TFTP 69
Trivial File Transfer Protocol uses UDP 69 and has no built-in authentication or encryption; restrict it to controlled network uses.
HTTP 80 / HTTPS 443
Web traffic uses TCP 80 or encrypted HTTPS on 443; a certificate warning should be investigated, not ignored.
POP3 110 / secure 995
POP3 downloads mail, often to one client; encrypted POP3 commonly uses TCP 995.
IMAP 143 / secure 993
IMAP keeps mail on the server for synchronized clients; encrypted IMAP commonly uses TCP 993.
SNMP 161/162
UDP 161 is commonly used for queries and UDP 162 for traps; secure versions and restricted management access matter.
Syslog 514
Syslog commonly sends logs over UDP 514; TCP or TLS alternatives may be used for more reliable or protected transport.
LDAP 389 / LDAPS 636
Directory queries commonly use LDAP 389; encrypted LDAP commonly uses TCP 636.
SMB 445
Windows file and printer sharing typically uses TCP 445; restrict exposure and patch systems.
RDP 3389
Remote Desktop commonly uses TCP/UDP 3389; expose only through controlled, authenticated access.
SIP 5060/5061
Session Initiation Protocol commonly uses 5060 unencrypted or 5061 with TLS for call signaling.
NTP 123
Network Time Protocol typically uses UDP 123; synchronized clocks support reliable logs and authentication.

legacy sharing

NetBIOS 137–139
UDP 137 resolves NetBIOS names, UDP 138 provides datagrams, and TCP 139 carries sessions; modern direct-hosted SMB normally uses TCP 445.
AAA server
Authentication checks identity, authorization grants actions, and accounting records activity; centralized AAA supports consistent access policy.
Proxy and load balancer
A proxy mediates client requests; a load balancer distributes requests across healthy backends.
UTM and spam gateway
Unified threat management combines network defenses; a mail security gateway filters suspicious messages before delivery.
SCADA and IoT
Industrial controllers and smart devices may have limited update support; inventory them and isolate access rather than assuming desktop protections.
LAN, WAN, PAN, MAN, SAN, WLAN
LAN is local networking, WAN spans sites, PAN connects personal devices, MAN serves a metro area, SAN carries storage traffic, and WLAN is a wireless LAN.

Networking · Wi-Fi, services, and tools

Design and diagnose a small network

wireless

802.11a
Operates in 5 GHz with less range through obstacles than 2.4 GHz; older standard with limited channel overlap.
802.11b/g
Legacy 2.4 GHz standards; longer reach but more interference and fewer non-overlapping channels.
802.11n (Wi-Fi 4)
Can operate in 2.4 or 5 GHz; channel width and spatial streams affect throughput.
802.11ac (Wi-Fi 5)
5 GHz Wi-Fi with wider channels and multi-stream capability; client and access point both constrain speed.
802.11ax (Wi-Fi 6/6E)
Improves efficiency in dense environments; Wi-Fi 6E adds 6 GHz where region and device permit.
2.4 GHz band
Better obstacle penetration and broad compatibility but crowded; use 20 MHz channels and plan channel reuse carefully.
5 GHz band
More channels and typically less interference than 2.4 GHz, with shorter range through walls.
6 GHz band
Available to Wi-Fi 6E/7 devices in supported regions; offers added spectrum but has shorter practical reach.
Channel overlap
In 2.4 GHz, channels 1, 6, and 11 are the common non-overlapping choices in North America at 20 MHz.
SSID
The network name advertises a WLAN; hiding it does not secure the network because clients can still reveal it.
WPA2/WPA3
Use current supported encryption and strong unique credentials; WPA3 improves protections when all required clients support it.
WPS
Push-button/PIN onboarding can simplify joining but may introduce risk; disable it when not needed by policy.
Roaming
Clients move among access points sharing a WLAN; coverage overlap and consistent configuration support handoff.
Interference
Microwaves, neighboring APs, Bluetooth, and physical obstructions can reduce signal quality; inspect channel and location.

devices and services

Router
Connects different IP networks and forwards traffic using routes; home routers commonly combine several functions.
Switch
Connects devices within a LAN and forwards frames by learned MAC address; managed models add VLAN and monitoring features.
Access point
Bridges wireless clients onto a wired LAN; it is not necessarily a router or DHCP server.
Modem/ONT
Terminates the ISP access technology—such as cable, DSL, or fiber—and presents a customer-side connection.
Firewall
Applies traffic rules between trust zones; review source, destination, port, direction, and rule order when access fails.
PoE
Power over Ethernet supplies supported devices over network cabling; match PSE standard, powered-device needs, and switch budget.
DHCP scope
A pool of addresses and options a DHCP server offers; exclusions and reservations prevent conflicts with static infrastructure.
DSL internet
Uses telephone copper and digital subscriber line service; performance depends on distance to provider equipment and line condition.
Cable internet
Uses a cable-television coaxial network and a cable modem; neighborhood segment congestion can affect peak performance.
Fiber internet
Uses optical fiber for high bandwidth and low latency; the ONT commonly converts the provider's optical service to Ethernet.
Satellite internet
Reaches remote locations through satellite links; latency, weather, line of sight, and data plan can affect use.
Cellular broadband
Uses a carrier radio network through a phone, hotspot, or modem; coverage, signal, congestion, and data plan matter.
DNS A and AAAA
A maps a name to IPv4; AAAA maps a name to IPv6.
DNS CNAME and MX
CNAME aliases one name to another; MX identifies mail exchangers and includes priority.
DNS TXT
TXT stores arbitrary text used by verification and email-authentication records such as SPF, DKIM, and DMARC.
SPF
A DNS TXT policy lists hosts authorized to send mail for a domain; receivers evaluate it with other signals.
DKIM
A sending system signs selected message headers; recipients use a published DNS key to check the signature.
DMARC
A domain policy tells receivers how to handle mail failing SPF/DKIM alignment and enables reporting.
VPN
An encrypted tunnel carries traffic across an untrusted network; authentication, routing, and split/full tunnel policy affect access.
VLAN trunk
Carries multiple tagged VLANs between network devices; native-VLAN mismatch can create connectivity or security problems.

tools and access

Ping
Tests IP reachability and round-trip response with ICMP; a blocked echo response does not prove the host is down.
ipconfig / ifconfig
Displays interface addressing; ipconfig /all includes DHCP and DNS details on Windows.
ipconfig /release and /renew
Releases and requests a DHCP lease on Windows; use after checking link and DHCP availability.
ipconfig /flushdns
Clears the local Windows DNS resolver cache; it does not repair incorrect authoritative DNS records.
nslookup / dig
Queries DNS records to separate name-resolution failures from routing or application problems.
tracert / traceroute
Shows responding hops along a path; filtering or asymmetric routing can make results incomplete.
netstat
Shows active connections and listening ports; interpret local/remote endpoints and process context.
Cable tester
Checks wire map and common pair faults; certification equipment is needed to validate performance category.
Loopback plug
Connects a port's transmit and receive paths to test a local interface; it does not test the whole network.
Tone generator and probe
Helps identify a cable run among bundles; disconnect sensitive equipment and use safely.
Wi-Fi analyzer
Shows signal strength, channel use, and nearby networks; compare at the actual client location.
Command-line safety
Prefer read-only diagnostics first; record the exact output and avoid destructive commands without authorization.

installation tools

Crimper and cable stripper
Strip the jacket without damaging conductors, arrange pairs to the chosen standard, and crimp the correct plug; verify with a cable tester.
Punchdown tool and patch panel
A punchdown tool seats conductors into insulation-displacement terminals; a passive patch panel organizes cable runs rather than switching traffic.
Network tap
Provides a controlled copy of traffic for analysis; obtain authorization because captures can contain sensitive data.
PoE standards
802.3af commonly supplies up to 15.4 W at the source, 802.3at up to 30 W, and 802.3bt higher power; delivered power and total switch budget also matter.
802.11be (Wi-Fi 7)
Supported equipment can use features such as multi-link operation and wider channels; region, band, and both endpoints limit available features.
NFC and RFID
NFC enables very-short-range exchanges such as taps; RFID identifies tags over distances that depend on frequency and tag type.
WISP
A wireless internet service provider uses radio links for last-mile access; antenna alignment, line of sight, and interference affect reliability.

Hardware · boards, processors, memory

Domain 3 · Hardware · 25%

platform

Motherboard form factor
ATX, microATX, and Mini-ITX define board size, mounting, and expansion; case and PSU must fit.
Chipset
Controls platform I/O features and supported capabilities; verify CPU, RAM, and board compatibility as a complete platform.
CPU socket
The physical and electrical interface must match the processor generation and board firmware support.
CPU cores and threads
Cores execute work; simultaneous multithreading can expose additional logical threads but is not an extra physical core.
CPU cache
Small, fast memory close to processing cores; insufficient cache hits can increase slower main-memory access.
Integrated graphics
Graphics processing built into CPU or chipset; confirm a supported display output exists if no discrete GPU is installed.
Discrete GPU
A separate graphics adapter draws more power and may need PCIe power connectors and sufficient case airflow.
UEFI firmware
Modern system firmware initializes hardware and supports features such as Secure Boot and GPT boot.
BIOS/UEFI setup
Firmware settings control boot order, virtualization, time, and devices; document prior values before changing settings.
POST
Power-on self-test checks basic hardware; beep or LED codes are vendor-specific clues, not universal diagnoses.
TPM 2.0
A hardware or firmware security module protects keys and supports platform security features such as BitLocker.
CMOS/RTC battery
Maintains real-time clock and some firmware settings; repeated clock loss after power removal suggests replacement may be needed.
Expansion slots
PCIe slots accept cards; lane count and physical clearance can differ from apparent slot length.
PCIe generations
Link speed depends on both endpoint generation and lane width; a card can run in a compatible slower slot.
Virtualization extensions
Intel VT-x/AMD-V enable hardware-assisted virtualization and may need to be enabled in firmware.

memory

DDR generation
DDR4 and DDR5 DIMMs are electrically and physically distinct; never force an incompatible module into a slot.
DIMM vs SO-DIMM
DIMMs are common in desktops; shorter SO-DIMMs are common in laptops and compact systems.
ECC memory
Detects and can correct certain memory errors; it requires compatible CPU, motherboard, and memory support.
Dual-channel memory
A matched configuration can increase memory bandwidth; install modules in the board's documented paired slots.
RAM capacity
More memory helps avoid paging when workload demand exceeds physical RAM; check OS and board limits.
RAM speed
The CPU and board determine supported speed; mixed modules often operate at a common supported setting.
XMP/EXPO profile
Memory overclocking profile can raise speed beyond baseline; validate stability and platform support.
Page file / swap
Disk-backed virtual memory supports memory pressure but is much slower than RAM; it is not a substitute for adequate memory.
Thermal paste
Fills microscopic gaps between CPU heat spreader and cooler; use an appropriate small application and mount evenly.
CPU cooler
Must match socket, thermal load, and case clearance; verify fan or pump power connection and airflow direction.

Hardware · storage, RAID, and power

Choose compatible parts and interpret failures

storage and redundancy

HDD
Magnetic disks offer economical capacity but have moving parts; clicking, slow reads, or SMART alerts merit backup and diagnosis.
SATA SSD
Flash storage on the SATA interface improves latency and shock resistance over HDDs but is limited by SATA throughput.
NVMe SSD
Uses PCIe and the NVMe protocol for low-latency storage; confirm M.2 keying, lane support, thermal clearance, and boot support.
SMART health
Drive self-monitoring can report errors and wear; a healthy status does not guarantee future failure-free operation.
RAID 0
Striping improves throughput and uses all capacity but has no redundancy; any member failure can lose the array.
RAID 1
Mirrors data across drives for redundancy; usable capacity is typically that of one member, and it is not a backup.
RAID 5
Striping with single-parity protection tolerates one member failure; needs at least three disks and rebuilds stress remaining disks.
RAID 6
Dual parity tolerates two member failures; needs at least four disks and has more parity overhead than RAID 5.
RAID 10
Mirrored pairs are striped; it combines performance and redundancy but needs at least four disks.
RAID controller
Hardware or software manages an array; use supported drives and monitor controller alerts and rebuild state.
RAID rebuild
Replacing a failed member can trigger a lengthy rebuild; preserve backups and avoid interrupting the process.
Backup distinction
RAID keeps service running through some disk failures; independent backups protect against deletion, corruption, and disaster.

power and cooling

PSU wattage
Choose a quality supply with adequate capacity and connectors for the complete system, including GPU load.
80 PLUS rating
Describes power-conversion efficiency at tested load points; it does not certify total PSU quality or reliability.
ATX power connectors
The 24-pin board connector and CPU EPS connector serve different purposes; do not confuse EPS with PCIe power.
Modular PSU cables
Use only the exact PSU manufacturer's compatible cables; similar-looking modular cables can have different pinouts.
UPS
Battery backup provides ride-through and orderly shutdown; size it for load and runtime, and test battery health.
Surge protector
Limits voltage spikes but does not provide battery runtime; replace after significant events per manufacturer guidance.
Power symptoms
No lights suggest AC, cable, switch, or PSU path; repeated restarts can indicate power, heat, or component instability.
Airflow path
Arrange intake and exhaust for unobstructed flow; dust filters and cable routing affect cooling.
Fan failure
Rattling, no spin, or rising temperatures can point to a failed fan; verify header, control, and replacement size.
Thermal throttling
A system reduces clock speed to control heat; inspect temperatures, cooler mounting, fan behavior, and ventilation.

storage and power reference

SATA vs SAS
SATA is common in desktops; Serial Attached SCSI is common in enterprise storage. A compatible SAS controller may accept SATA drives, but a SATA controller cannot operate SAS drives.
M.2 vs mSATA
These are different compact storage form factors; matching physical size alone does not establish protocol or connector compatibility.
Removable and optical media
Flash drives, memory cards, and optical discs differ in reader support, durability, write capability, and safe handling.
PSU input and output
Supplies accept specified AC inputs, such as 110–120 V or 220–240 V, and provide DC rails including 3.3 V, 5 V, and 12 V; verify any manual voltage switch before connecting power.
Redundant power supplies
Supported systems can continue through one supply failure if remaining capacity is sufficient; separate power feeds improve resilience.

Hardware · connectors, displays, cabling

Identify the physical interface before replacing parts

connectors

USB-A
Rectangular host connector used by many peripherals; USB generation and speed depend on the port and device.
USB-C
A reversible connector shape; it does not by itself guarantee USB 3 speed, video, USB Power Delivery, or Thunderbolt.
Thunderbolt
Carries high-speed data and often display/power over supported USB-C connectors; both devices, cable, and port must support it.
USB versions
USB 2.0, USB 3.x, and USB4 differ in capability; the slowest component in the path limits operation.
USB Power Delivery
Negotiates power levels over supported USB-C equipment; use a certified, appropriately rated charger and cable.
HDMI
Digital audio/video interface common on displays and TVs; version, cable, and both endpoints determine supported resolution and refresh.
DisplayPort
Digital display interface with features such as daisy chaining on supported equipment; check MST and port capability.
Mini DisplayPort
Smaller DisplayPort connector used on some older systems; connector adapters do not add unsupported video features.
DVI
Legacy digital or combined digital/analog display family; connector subtype and adapter determine signal compatibility.
VGA
Analog video connector; susceptible to signal quality issues and carries no audio.
RJ-45 Ethernet
8-position modular connector used for twisted-pair Ethernet; verify latch, pair termination, and link lights.
RJ-11
Smaller modular telephone connector; do not mistake it for Ethernet even though a cable may physically fit some jacks.
SATA data and power
Separate narrow data and wider power connectors attach SATA drives; check cable seating and motherboard port status.
PCIe power
6/8-pin or newer GPU power connectors supply graphics cards; use the proper PSU cable, not a CPU EPS lead.
Lightning
Apple device connector used on selected legacy devices and accessories; confirm generation-specific accessory compatibility.

display and cables

Twisted-pair Ethernet
Cat5e supports Gigabit Ethernet; Cat6/6A and higher categories support additional bandwidth over defined distances.
UTP vs STP
Unshielded twisted pair is common; shielded cable requires correct bonding and installation to reduce interference effectively.
Fiber optic
Carries light over glass/plastic, resists electromagnetic interference, and can span longer distances; match optics and fiber type.
Single-mode vs multimode
Single-mode supports longer links with suitable optics; multimode is common for shorter building/campus runs.
Coaxial cable
Uses a central conductor and shielding; cable internet and legacy video may use coax with suitable connectors.
Straight-through patch lead
Standard Ethernet patch cable connects unlike device roles in traditional setups; modern auto-MDI-X reduces crossover needs.
Cable category
Select category to meet speed and distance requirements; damaged pairs or tight bends can degrade link quality.
HD resolution
Resolution is the pixel grid, such as 1920×1080; supported output depends on GPU, connector, cable, and monitor.
Refresh rate
Hertz indicates display refreshes per second; high refresh requires support across the full graphics-to-display path.
OLED vs LCD
OLED pixels emit their own light; LCD uses a backlight and liquid-crystal layer. Diagnose burn-in or backlight symptoms accordingly.
Backlight failure
A faint image visible under a flashlight can indicate LCD backlight or power trouble, rather than absent video generation.
Dead pixels
A stuck or dead pixel is localized; follow the device's vendor policy before proposing panel replacement.
Touch display
A working image but absent touch can indicate digitizer, driver, calibration, or cable trouble rather than GPU failure.
KVM switch
Shares keyboard, video, and mouse between systems; confirm supported display format and select the correct host.

physical reference

T568A and T568B
Both define Ethernet pair termination. Use the same standard at both ends for a straight-through cable; preserve twists close to the connector.
Plenum and direct-burial cable
Select the approved jacket for the installation environment: plenum cable limits fire/smoke hazards in air-handling spaces; outdoor/burial cable has different environmental protection.
LC, SC, ST, and F-type
LC/SC/ST are fiber connector families; F-type is threaded coax. Match connector, fiber, and optical transceiver rather than forcing an adapter.
USB 2.0 and USB 3.x rates
USB 2.0 High Speed is 480 Mb/s; USB 3.x commonly offers 5, 10, or 20 Gb/s depending on generation and lane support. Advertised link rate is not application throughput.
LCD panel types
IPS generally favors viewing angles and color, TN response/cost, and VA contrast; actual performance depends on the panel.
Mini-LED, gamut, and density
Mini-LED is an LCD backlight technology; color gamut describes reproducible colors, and pixel density describes pixels per unit of screen size.

Hardware · peripherals and printers

Installation, supplies, and maintenance

peripherals

USB peripheral
Test a known-good port and cable, then inspect Device Manager and driver state; avoid repeatedly moving an active storage device.
Docking display
Check dock firmware, host video protocol support, display input, and cable capability before replacing the monitor.
KVM behavior
If keyboard or video follows the wrong host, verify selected channel, USB emulation, and supported display resolution.
Touchpad
Check function-key toggle, OS setting, driver, and palm-rejection behavior before assuming hardware failure.
Biometric reader
Enrollment, clean sensor surface, driver, and policy all affect login; keep a secure alternate sign-in method available.
External storage
Use safe eject where applicable and confirm filesystem compatibility, encryption, and organization data policy.
Webcam privacy
Physical shutter, OS privacy setting, app permission, and endpoint policy can each block camera access.
Audio device
Check output device, mute, jack detection, driver, and application routing; test with a known-good headset.
Calibration
Touchscreens and some input devices need calibration; use the OS or vendor procedure and verify after updates.

printers

Laser printing process
Toner is electrostatically placed, transferred, and fused to paper; repeated marks can implicate drum or fuser.
Inkjet printing
Liquid ink is sprayed through nozzles; dried or clogged heads cause missing colors or streaks.
Thermal printer
Uses heat-sensitive media or ribbon; verify paper orientation, media type, and head condition.
Impact printer
Pins strike an ink ribbon; useful for multipart forms but noisy and mechanically maintained.
Toner cartridge
Contains toner supply for laser printing; follow handling guidance and replace only when indicated.
Drum unit
Forms the latent image in many laser printers; defects may cause repeating spots or streaks at a consistent interval.
Fuser
Heats and presses toner into paper; smudging, poor adhesion, or a fuser error can point to this assembly.
Transfer roller/belt
Moves toner image to paper; contamination or wear can cause incomplete transfer or image defects.
Pickup and separation rollers
Feed one sheet at a time; worn rollers can cause no-pick or multi-feed symptoms.
Print queue
A stuck job can block later work; inspect queue, correct the selected printer, and clear jobs using approved steps.
Spooler
Windows print spooler manages queued jobs; restart only after preserving jobs or diagnosing a stuck queue.
Duplex unit
Turns paper for two-sided printing; check supported media, paper path, and jam sensors.
Printer network address
A changed DHCP address can leave a port pointing to the old IP; use reservation or correct printer discovery.
Preventive maintenance
Follow manufacturer schedules for cleaning, consumables, and calibration; power down as directed before servicing.
Printer safety
Fusers are hot and some printers contain high voltage; allow cooling and never bypass interlocks.

printer configuration

Laser process order
Processing → charging → exposing → developing → transferring → fusing → cleaning. Associate repeated defects with the relevant component.
PCL vs PostScript
Printer Control Language and PostScript are page-description approaches; select a driver the device and application support to avoid garbled output.
Secure printing
Hold a job until the authorized user authenticates at the printer; badges and audit logs reduce unattended sensitive output.
Scan destinations and ADF
Confirm permission and destination settings for SMB, email, or cloud scanning; an automatic document feeder handles multiple pages, while a flatbed supports individual originals.
Paper settings and finishing
Match tray, media size/type, orientation, duplex, and finishing options in both the printer and driver before diagnosing jams or wrong output.

Virtualization and cloud computing

Domain 4 · Virtualization & Cloud Computing · 11%

virtualization

Type 1 hypervisor
Runs directly on host hardware and manages guest VMs; common in server virtualization.
Type 2 hypervisor
Runs as an application on a host operating system; convenient for desktop labs and local testing.
Virtual machine
Emulates a computer with virtual CPU, memory, storage, and network; resources still depend on the physical host.
Host and guest OS
The host runs the hypervisor/application; the guest is the operating system installed inside a VM.
VM requirements
Hardware-assisted virtualization, sufficient RAM/storage, firmware support, and compatible OS licensing may be required.
Snapshot
Captures a point-in-time VM state for short-term testing or rollback; it is not a durable independent backup.
Virtual switch
Connects virtual NICs to other VMs or physical networks; bridged, NAT, and host-only modes differ in reachability.
Container
Packages an application and dependencies while sharing the host kernel; lighter than a full guest OS but not a security boundary by default.
VDI
Virtual desktop infrastructure hosts user desktops centrally; access relies on network, identity, capacity, and endpoint client.
Resource contention
Overcommitted CPU, memory, or storage can slow VMs; check host pressure and workload allocation.

cloud models

IaaS
Provider supplies compute, storage, and networking; customer manages guest OS and applications.
PaaS
Provider manages runtime/platform components; customer deploys code and manages application data and configuration.
SaaS
Provider delivers a complete application; customer manages users, access, and their data within the service.
Public cloud
Shared provider infrastructure offers services over a network with logically separated customer resources.
Private cloud
Cloud-like infrastructure dedicated to one organization; it can be on-premises or hosted.
Hybrid cloud
Connects private/on-premises environments and public cloud services; identity, network, and data integration matter.
Community cloud
Infrastructure is shared by organizations with common requirements, such as policy or mission.
Elasticity
Resources can scale with workload demand; distinguish automatic adjustment from simply buying larger capacity.
Measured service
Cloud usage is monitored and metered; understand cost drivers and configure budgets and alerts.
Shared responsibility
Provider and customer security duties vary by service model; more managed services shift infrastructure operations, not data accountability.

cloud operations

Availability and multitenancy
Availability is service accessibility over time; multitenancy shares infrastructure while logically separating customers.
Ingress and egress
Inbound/outbound data transfer may have different charges; budget storage, compute, and network usage together.
File synchronization
Sync propagates changes across devices and may propagate deletion; keep independent recoverable backups.
Application virtualization
Runs or delivers applications separately from their normal host installation; compatibility, licensing, and isolation still require validation.

Troubleshooting · hardware and mobile symptoms

Hardware & Network Troubleshooting · 28% · practical fault isolation

hardware symptoms

No power
Check outlet, power strip, adapter, cable, PSU switch, and power-button connection in a safe order.
No POST
Disconnect nonessential peripherals; inspect diagnostic LEDs/beeps, memory seating, power leads, and recent changes.
Random shutdowns
Check thermal readings, blocked vents, fans, battery/adapter, PSU stability, and system logs.
Overheating laptop
Confirm vents are clear, fan runs, surface is firm, and workload is reasonable; service internally per manufacturer guidance.
Slow system
Check free storage, startup load, memory pressure, thermal throttling, malware indicators, and recent software changes.
Drive not detected
Check power/data connection, firmware visibility, controller mode, and disk health; protect data before repair attempts.
Clicking HDD
Unusual mechanical clicks plus read errors can signal imminent failure; stop unnecessary use and prioritize data preservation.
Memory error
Run approved diagnostics, reseat modules with power isolated, and test modules/slots methodically.
Display has no image
Verify monitor power/input, cable seating, selected GPU output, brightness, and a known-good display/cable.
Faint laptop image
A faint picture with a flashlight may indicate backlight failure; external-display comparison helps localize the issue.
Poor battery runtime
Check battery health, background processes, brightness, radio use, and adapter/charge behavior.
Intermittent USB
Test another port/cable, inspect connector damage and power demand, then check hub driver and power management.

printer symptoms

Blank laser pages
Check toner level, cartridge seal, imaging drum, and whether the print job contains expected content.
Faded laser output
Low toner, eco mode, drum wear, or transfer/fuser issues can reduce density; inspect supply status before replacing assemblies.
Repeating printer marks
Measure repeat spacing and compare with drum, roller, or fuser circumference; use the service guide to localize.
Toner smears
Toner not fused can indicate fuser temperature, media setting, or fuser assembly trouble; follow hot-surface precautions.
Inkjet streaks or missing color
Run the approved nozzle check and cleaning cycle; repeated cleaning consumes ink, so confirm cartridge and head status.
Paper jam
Power down or open access as directed and remove paper along the feed path without tearing; inspect rollers and sensors.
Multiple sheets feed
Check paper type, humidity, tray guides, and separation roller; fan/replace paper according to printer guidance.
Printer offline
Check power, cable or Wi-Fi, selected queue, current network address, and printer status before reinstalling drivers.
Wrong or garbled output
Verify correct printer, driver, page description language, paper size, and application print settings.
Duplex failure
Confirm duplex unit exists, paper is supported, and driver settings match the job.
Safe printer service
Allow fuser to cool, avoid high-voltage areas, and follow manufacturer instructions; do not bypass interlocks.

maintenance

ESD control
Use an ESD strap connected to an approved ground and an ESD-safe work surface; handle boards by their edges.
Power isolation
Disconnect mains and battery as directed before opening equipment; capacitors can retain hazardous energy.
Data first
Before disk repair, firmware changes, or OS recovery, confirm backup status and protect user data.
Known-good substitution
Replace one variable at a time with a known-good component to isolate cable, peripheral, or part failure.
Firmware update
Use the exact device package and stable power; update only for a relevant fix or requirement and preserve recovery options.
Recent change
Ask what changed—hardware, driver, update, setting, or location—to narrow causes without assuming user error.
Manufacturer diagnostics
Use approved built-in tests and record codes; a code is evidence to interpret, not always a final diagnosis.
Safe repair boundary
Stop when there is swelling, burning smell, liquid damage, exposed mains, or a task beyond authorization or training.

Troubleshooting · networking symptoms

Follow the signal from link to service

symptoms

No link light
Check power, cable seating, NIC enabled state, switch port, and cable with a known-good substitute.
APIPA address
A 169.254.x.x address usually means DHCP did not provide a lease; verify WLAN association, scope, relay, and server.
Can reach gateway only
Local link works but upstream routing, gateway policy, DNS, or ISP path may fail; test each layer separately.
IP works, name fails
Check resolver address, DNS query, suffix/search settings, and cache; do not change routing if IP connectivity works.
One site unavailable
Test resolution and route, compare another client, and check proxy, TLS certificate, filtering, and service status.
Slow Wi-Fi
Measure signal and channel utilization near the user; inspect interference, distance, band, client capability, and backhaul.
Intermittent wireless
Correlate drops with roaming, power saving, interference, DHCP renewal, and access-point logs.
Duplicate IP warning
Find static assignments and DHCP scope overlap; reserve or correct an address after identifying both devices.
VPN connects, no resources
Check routes, DNS, split-tunnel policy, MFA/session status, and remote access rules.
Printer unreachable
Confirm printer power and link, current IP, subnet/VLAN, name resolution, and print queue target.

tools and safe steps

Layered check
Confirm physical link, interface addressing, gateway route, DNS resolution, then application access; this is practical workflow, not a formal objective step list.
Ping sequence
Test loopback, local address, gateway, known remote IP, then hostname; interpret blocked ICMP carefully.
Lease renewal
After confirming connectivity and DHCP service, renew the lease to obtain current network settings.
Cable inspection
Look for crushed cable, broken latch, improper bend, and pin damage; replace rather than tape a compromised connector.
AP placement
Move access point away from metal, dense walls, and interference sources; validate coverage at the problem location.
Port security
Check switch VLAN, disabled/err-disabled status, PoE budget, and access control before moving a managed endpoint.
Document evidence
Record IP configuration, timestamps, affected scope, test results, and any changes for handoff and trend analysis.

additional symptoms

Jitter and VoIP quality
Variation in packet arrival time can disrupt voice even when average latency looks acceptable; compare congestion, loss, wireless signal, and QoS configuration.
Port flapping
Repeated link up/down events can indicate a damaged cable, bad port, power problem, or interface negotiation issue; correlate switch logs with physical tests.
RAID failure
Read controller/drive status, identify the failed member accurately, protect backups, and use the vendor rebuild procedure; do not initialize the array as a repair.
Projector shutdown
Check ventilation, filter, lamp/temperature warnings, and power; let the device cool and follow the service guide.
Swollen battery or liquid damage
Stop charging or using the affected device, isolate power when safe, and follow approved handling/replacement procedures; do not puncture a battery.

Practice next · official references

Free quizzes, the companion exam, and primary-source objectives

domain quizzes

Mobile Devices domain quiz
Free mobile devices practice questions and explanations.
Networking domain quiz
Free networking practice questions and explanations.
Hardware domain quiz
Free hardware practice questions and explanations.
Virtualization & Cloud domain quiz
Free virtualization & cloud practice questions and explanations.
Hardware & Network Troubleshooting domain quiz
Free hardware & network troubleshooting practice questions and explanations.

keep studying

Core 1 sample-test hub
Mixed sample, all domain quizzes, explanations, and study plan.
Quick-start mixed sample
Begin with a short free quiz before choosing a domain.
Other A+ exam: Core 2 (220-1202)
The companion exam is required from the same series.
Other A+ cheat sheet: Core 2
Revise the other half of the A+ objectives.
CompTIA certification page
Confirm current exam policies and certification requirements.
Official 220-1201 exam objectives · version 2.0
Primary-source list of exam domains and tested objectives.

Frequently asked questions

What is the CompTIA A+ Core 1 exam format?

Core 1 (220-1201, V15) has a maximum of 90 questions and a 90-minute time limit. The passing score is 675 on CompTIA's 100–900 scale.

What topics are covered by Core 1?

The V15 Core 1 domains are Mobile Devices (13%), Networking (23%), Hardware (25%), Virtualization and Cloud Computing (11%), and Hardware and Network Troubleshooting (28%).

Do I need to pass both A+ exams?

Yes. CompTIA A+ certification requires passing Core 1 (220-1201) and Core 2 (220-1202) from the same exam series.

Is this cheat sheet and its practice material free?

Yes. This reference and the linked sample tests are available free. The sample quizzes are shorter than the certification exam and do not reproduce its performance-based questions.

Does a practice quiz percentage predict my scaled score?

No. A sample percentage is only the share of those practice questions answered correctly. CompTIA reports the exam passing score on a 100–900 scale; do not convert a short quiz percentage into a predicted score.

Independent study material, not affiliated with or endorsed by CompTIA. Exam details and objectives can change; always consult the official source linked above.

Open the interactive cheat sheet | All 50+ Free Certification Cheat Sheets | Free Practice Tests